The Final Push

The final push is on for the trim which means that the final push is on for the project in general...at least the interior.  There are about twenty or so stray pieces of wood left to put in place which will probably be in this week here and there.  We have the second round of floor finishing coming in next week so we are in the process of cleaning everything and taking it up off of the floor.  The next few weeks or so should consist mainly of organizing tools and materials and starting the deep clean of the place.

Transition between plaster and brick

Original vent waiting to be installed

Second floor door finished

Removing Gaps

Removing more gaps

Ready for sanding

Freshly wired and waiting for coverplate

Final position

Washer and Dryer Electrical hookup

Dining room table

Dining room table

Last Window Finished

Compared Shots

Instead of posting another set of photos of people putting in trim, trim, milling trim, cutting trim, and or varnishing trim its about time to have some comparison shots.

Upstairs Windows

Upstairs Windows

Sun Room

Sun Room

Basement Stairs

Basement Stairs

Basement Stairs

Great Room Entrance

Great Room Entrance

Front Door

Front Door

Sun Room Windows

Sun Room Windows

Utility Room

Utility Room

Original Real Estate Photo

Window work

Follow my blog with Bloglovin
 
     It was one of the best work weekends in quite some time as far a getting trim knocked out.  Doug, Amber, Lynch and Carly took shifts sanding and varnishing various window parts.  It was dry enough too that we could get them turned around from start to install in about two hours.  So it was a combination of quick turn around times and having all the universal pieces ready to go that allowed us to get 167 pieces installed.  We fell a little short of the goal (getting all the windows done), but there are only about 40 pieces to go and most of them are made and sitting about.  If things go well this up coming week then we will have the windows finished up by Tuesday night and most of the baseboard in by the end of next weekend.

    The goal date is to have the interior done enough (I will still need winter projects) to be moved in by the end of October.  Where we are now it looks like this is fast becoming a reality.  There isn't too much raw woodworking left to do, so we will be filling and sanding cracks, gaps and countersunk nails for the first week or so of October.  After that its detailed drywall repair and lots and lots of cleanup.

Doug Varnishing the Table Top

Putting Sashes in the sun room

finishing up the stair Sills

Lock mortised into bedroom door

Bedroom door handle

Master bedroom windows finished

Plates for bedroom door

Signing the table

First layer of trim

Second layer of trim

Table drying

Still Drying

Yet another picture of varnished wood drying

Great room windows done

Third round of trim

Five pieces left to put in

Adding Top Plates to great room windows

One more piece to go

Finished product

Wood Icing

The past week has certainly had its ups and downs with pieces not fitting, drill bits snapping and to top it off the motor to my table saw burned out Friday night.  Needless to say it was a frustrating start to any work weekend.  I ended up at Lowes Friday evening since they are apparently the only box store around anymore that sells decent tools and contractor grade saws.  To be able to call it a "Table" saw then it really should have a table attached to it, not a 12" by 12" top that weighs 40 lbs.  The last thing I want is to have the thing flip over while ripping out a board.  I say I decided to get a porter cable saw, but really that was the only one on the floor and not "special order" so the decision was more along the lines of taking a two to three week break from working and paying freight costs or just getting the floor model.   So far it is working great and has a bit more power to it than my previous saw.
By the end of the weekend we were back into the swing of things and accomplished a decent amount of progress with Amber sanding and varnishing blanks and Lynch planing down the blanks I ripped out of our raw oak.  Despite our best efforts we were no where near what I had hoped to get done, but that has only happened once or twice since the start of things two years ago.  The current goal is to have all the windows trimmed out by the end of the weekend so base board can be installed next week.  It may be doable depending on how much we can get done during the day or evenings.  It looks like we have a little over half of the window pieces installed now.

Hanging Closet Doors

Putting in Top Trim

Stained Glass Framed and Installed

Casing Stairwell windows

Kitchen Windows Done

Looking through The glass

Top plates ready to go

Door Uprights

Entry to the Bedrooms

Working bathroom with hot water

Transition in and closet trimmed

Knobs

Study window 8/9 done